6×120 means 6 wheel mounting holes arranged on a circle with a diameter of 120 mm (about 4.724 inches).
6×120 Quick Facts
| Lug count | 6 |
| Pitch circle diameter (PCD) | 120 mm |
| PCD in inches | 4.724 in |
What Does 6×120 Mean?
The first number indicates the number of lug holes. The second is the pitch circle diameter (PCD), measured through the centers of the mounting holes. The bolt pattern alone does not confirm wheel fitment.
| Number of lug holes | 6 |
| Pitch circle diameter | 120 mm |
6×120 in Inches
A 6×120 bolt pattern uses a 120 mm pitch circle diameter, or approximately 4.724 inches.
| Lug count | 6 |
| Pitch circle diameter (PCD) | 120 mm |
| PCD in inches | 4.724 in |
How to Measure the 6×120 Bolt Pattern
For an even-number lug pattern, measure from the center of one wheel stud to the center of the stud directly opposite it. That diameter is the PCD.
Always confirm the measurement against the vehicle or wheel manufacturer specifications before selecting wheels.
Does a Matching 6×120 Bolt Pattern Guarantee Wheel Fitment?
No. Confirm center bore, wheel diameter, wheel width, offset, brake clearance, lug seat and thread hardware, and load capacity.
Check Your Vehicle Before Choosing Wheels
Check vehicle-specific wheel specifications and wheel offset before replacing wheels.
6×120 FAQ
What does the 6x120 bolt pattern mean?
It means 6 lug holes on a 120 mm pitch circle diameter.
What is 6x120 in inches?
The PCD is approximately 4.724 inches.
Do all wheels with this bolt pattern fit?
No. Center bore, offset, brake clearance, wheel width and diameter, lug hardware and load rating must also match.
Wheel fitment safety note
Do not select wheels based on bolt pattern alone. Verify the precise vehicle year, model, trim, hub bore, wheel offset, fastener requirements and brake clearance using authoritative specifications.